Upgrading, Resyncing, And Rebooting Phones - Cisco Small Business SPA509G Administration Manual

Provisioning Basics

Upgrading, Resyncing, and Rebooting Phones

NOTE
Upgrading, Resyncing, and Rebooting Phones
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Set_Local_Date_(mm/dd) "" ;
Set_Local_Time_(HH/mm) "" ;
Time_Zone "GMT-07:00" ; # options: GMT-12:00/GMT-11:00/GMT-10:00/GMT-09:00/
GMT-08:00/GMT-07:00/GMT-06:00/GMT-05:00/GMT-04:00/GMT-03:30/GMT-03:00/GMT-
02:00/GMT-01:00/GMT/GMT+01:00/GMT+02:00/GMT+03:00/GMT+03:30/GMT+04:00/
GMT+05:00/GMT+05:30/GMT+05:45/GMT+06:00/GMT+06:30/GMT+07:00/GMT+08:00/
GMT+09:00/GMT+09:30/GMT+10:00/GMT+11:00/GMT+12:00/GMT+13:00
FXS_Port_Impedance "600" ; # options: 600/900/600+2.16uF/900+2.16uF/
270+750||150nF/220+820||120nF/220+820||115nF/370+620||310nF
FXS_Port_Input_Gain "-3" ;
FXS_Port_Output_Gain "-3" ;
DTMF_Playback_Level "-16" ;
DTMF_Playback_Length ".1" ;
Detect_ABCD "Yes" ;
Playback_ABCD "Yes" ;
Caller_ID_Method "Bellcore(N.Amer,China)" ; # options:
Bellcore(N.Amer,China)/DTMF(Finland,Sweden)/DTMF(Denmark)/ETSI DTMF/ETSI
DTMF With PR/ETSI DTMF After Ring/ETSI FSK/ETSI FSK With PR(UK)
FXS_Port_Power_Limit "3" ; # options: 1/2/3/4/5/6/7/8
Protect_IVR_FactoryReset "No" ;
You can optionally require an admin password to reset the phone to factory
defaults by setting the last line parameter to "yes."
If you are a service provider with a password, see the
Telephony Devices Provisioning Guide.
Cisco IP phones support secure remote provisioning and firmware upgrades. You
can generate configuration profiles using common, open-source tools that
integrate with service provider provisioning systems. Supported transport
protocols include TFTP, HTTP, and HTTPS with client certificates.
256-bit symmetric key encryption of profiles is supported. In addition, an
unprovisioned Cisco IP phone can receive an encrypted profile specifically
targeted for that device without requiring an explicit key. a secure first-time
provisioning mechanism using SSL functionality.
User intervention is not required to initiate or complete a profile update or
firmware upgrade. The Cisco IP phone upgrade logic is capable of automating
multi-stage upgrades, if intermediate upgrades are required to reach a future
upgrade state from an older release. A profile resync is only attempted when the
Cisco IP phone is idle, because this may trigger a software reboot.
Cisco Small Business IP
1-
6
171