Customizing Cisco SPA and Wireless IP Phones
Enabling Wireless (Cisco SPA525G/525G2 only)
STEP 4
STEP 5
Enabling Wireless (Cisco SPA525G/525G2 only)
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Configuring Bluetooth (Cisco SPA525G/525G2 only)
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Under Audio Input Gain (dB), choose the item to configure.
•
If you enter a positive value, amplification increases (sound is louder).
•
If you enter a negative value, amplification decreases (sound is softer).
•
You can enter a value from -6 decibels to +6 decibels. All fields default to
zero.
•
Try a value that is loud enough without producing echo (an issue if the input
gain is too high).
Click Submit All Changes.
The Cisco SPA525G/525G2 provides a built-in Wireless-G interface. To enable
wireless:
Log in to the configuration utility.
Click Admin Login and advanced.
Click the System tab.
Under Wi-Fi Settings, in the SPA525-wifi-on field, choose yes.
Click Submit All Changes.
The Cisco SPA525G/525G2 supports Bluetooth to allow use of the phone with a
wireless Bluetooth-enabled headset. The Cisco SPA525 (G2 model only) also
supports the use of your Cisco IP phone in conjunction with Bluetooth-enabled
mobile phone. You can do the following:
•
Pair your Bluetooth-enabled mobile phone and Cisco SPA525G2. Your
mobile phone is assigned a line button on your Cisco SPA525G2. You can
make and receive mobile calls using the Cisco SPA525G2.
3
79