Configuring On-Demand Ring Tones (Cisco Spa525G/525G2); User-Created Mp3 Ring Tones (Cisco Spa525G/525G2); Creating And Uploading Ring Tones Using The Ring Tone Utility (Cisco Spa30X And Cisco Spa50Xg Only) - Cisco Small Business SPA509G Administration Manual

Customizing Cisco SPA and Wireless IP Phones
Configuring Ring Tones
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
The phone does not require rebooting after downloading a ring tone.
To remove the User 1 ring tone from the phone, set the
http://phone_ip_addr/ringtone1?/delete
Click Submit All Changes.
Configuring On-Demand Ring Tones (Cisco SPA525G/
525G2)
The Cisco SPA525G/525G2 supports on-demand ring tones, which means that
ring tones are downloaded and played from a TFTP server when a call comes in.
To configure:
Log in to the configuration utility.
Click Admin Login and advanced.
Click the Phone tab.
Under Ring Tone, in one or more of the ten ring tone fields, enter the following:
n=office;w=[tftp://]host[:port]/path;c=0
and specify the URL to download in the host/port/path field. If the connection
cannot be established, a default ring tone is played.
Click Submit All Changes.

User-Created MP3 Ring Tones (Cisco SPA525G/525G2)

Cisco SPA525G/525G2 users can create up to two ring tones from an MP3 audio
file stored on a USB memory device. For instructions, see the
Business SPA525G/525G2 User Guide (SIP)
Appendix C, "Where to Go From Here,"
Creating and Uploading Ring Tones Using the Ring Tone
Utility (Cisco SPA30X and Cisco SPA50XG only)
To convert a file for use as a ring tone, use the Ring Tone Utility, available at:
path
to delete, as follows:
Cisco Small
, located on Cisco.com. (See
for the location of this document.)
3
74