Subscriber Information - Cisco Small Business SPA509G Administration Manual

Cisco SPA IP Phone Field Reference
Ext Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Proxy Fallback Intvl
Proxy Redundancy Method

Subscriber Information

Parameter
Display Name
User ID
Password
Use Auth ID
Description
This parameter sets the delay (sec) after which the
phone will retry from the highest priority proxy (or
outbound proxy) servers after it has failed over to a
lower priority server. This parameter is useful only if the
primary and backup proxy server list is provided to the
phone via DNS SRV record lookup on the server name.
(Using multiple DNS A record per server name does not
allow the notion of priority and so all hosts will be
considered at the same priority and the phone will not
attempt to fall back after a fail over).
Defaults to 3600
Select Normal or Based on SRV port. The phone
creates an internal list of proxies returned in the DNS
SRV records.
If you select Normal, the list contains proxies ranked by
weight and priority.
If you select Based on SRV, the phone uses normal,
then inspects the port number based on the first listed
proxy port.
Defaults to Normal.
Description
Display name for caller ID.
Extension number for this line.
Password for this line.
Defaults to blank.
To use the authentication ID and password for SIP
authentication, select yes. Otherwise, select no to use
the user ID and password.
Defaults to no.
B
313