Configuring Audio Settings; Configuring Audio Input Gain (Cisco Spa300 Series And Cisco Spa500 Series) - Cisco Small Business SPA509G Administration Manual

Customizing Cisco SPA and Wireless IP Phones

Configuring Audio Settings

Configuring Audio Settings
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
You can configure default audio volume settings for the phone. These settings can
be modified by the user by pressing the volume control button on the phone, then
pressing the Save soft button. (Not applicable to the WIP310.)
To configure the audio volume settings:
Log in to the configuration utility.
Click Admin Login and advanced.
Click the User tab. You can configure the following settings:
Parameter
Ringer Volume
Speaker Volume
Handset Volume
Headset Volume
Bluetooth Volume
Click Submit All Changes.
Configuring Audio Input Gain (Cisco SPA300 Series and
Cisco SPA500 Series)
You can amplify or deamplify the sound on your phone's handset, headset, and
speakerphone.
Log in to the configuration utility.
Click Admin Login and advanced.
Click the Phone tab.
Description
Sets the volume for the ringer.
Sets the volume for the full-duplex
speakerphone.
Sets the volume for the handset.
Sets the volume for the headset.
Sets the volume for the Bluetooth device.
NOTE Applies to Cisco SPA525G/525G2 only.
3
78