Customizing Cisco SPA and Wireless IP Phones
Customizing Phone Softkeys
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Log in to the configuration utility.
Click Admin Login and advanced.
Click the Phone tab.
Under Programmable Softkey Enable, choose yes.
In the Programmable Softkeys section, edit the following:
•
Programmable Softkey Enable: yes
•
PSK1: fnc=sd;ext=200@$PROXY;vid=2;nme=Sales
•
Idle Key List: Edit the field to add psk1|1 to the beginning of the string; for
example:
psk1|1;em_login;acd_login;acd_logout;avail;unavail;
redial;dir;cfwd;dnd;lcr;pickup;gpickup;unpark;em_logout;
•
Off Hook Key List: Edit the field to add psk1|1 to the beginning of the string;
for example:
psk1|1;option;redial;dir;cfwd;dnd;lcr;unpark;pickup;
gpickup;
•
Connected Key List: Edit the field to add psk1|1 to the string, editing the
softkeyname
existing
hold|1;endcall|2;conf|3;xfer|4;bxfer;confLx;xferLx;park;p
hold;flash;
becomes:
psk|1;hold|2;endcall|3;conf|4;xfer;bxfer;confLx;xferLx;
park;phold;flash
Click Submit All Changes. The "Sales" speed dial softkey is displayed in the lower
left of the screen when the phone is idle, when the phone is connected on a call,
and when the phone is off hook.
|1 to PSK1. For example, the original string:
3
71