Dial Plan; User Tab - Cisco Small Business SPA509G Administration Manual

Cisco SPA IP Phone Field Reference

User Tab

User Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

Dial Plan

The default dial plan script for each line is as follows: (*xx|[3469]11|0|00|[2-
9]xxxxxx| 1 xxx[2-9]xxxxxx| x xxxxxxxxxxx.).
Parameter
Dial Plan
Caller ID Map
Enable IP Dialing
This section describes the fields for the following headings on the User tab:
• Call Forward, page 319
• Speed Dial, page 319
• Supplementary Services, page 320
Description
Dial plan script for this line.
The default is (<9:>xx.)
(*xx| [ 3469]11| 0 |00|[2-9]xxxxxx|1xxx[2-
9]xxxxxxS0|xxxxxxxxxxxx.)
The dial plan syntax is expanded in the Cisco SPA to
allow the designation of three parameters to be used
with a specific gateway:
• uid – the authentication user-id
• pwd – the authentication password
• nat – if this parameter is present, use NAT mapping
Each parameter is separated by a semi-colon (;).
Inbound caller ID numbers can be mapped to a different
string. For example, a number that begins with
+44xxxxxx can be mapped to 0xxxxxx. This feature has
the same syntax as the Dial Plan parameter. With this
parameter, you can specify how to map a caller ID
number for display on screen and recorded into call
logs. (Not applicable to WIP310.)
Enable or disable IP dialing.
Defaults to no.
B
318