Configuring The Cisco Spa500S - Cisco Small Business SPA509G Administration Manual

Configuring the Cisco SPA500S Attendant Console
Setting Up the Cisco SPA500S Attendant Console
STEP 1
STEP 2
STEP 3
NOTE
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Add a context in the extensions.conf file.
Add a Subscribecontext command to point to the context in the sip.conf file.
Configure the Cisco SPA500S to register with the Asterisk server (see
"Configuring the Cisco SPA500S" section on page
The following example context uses "home" for extension 3500. This is entered in
the file extensions.conf:
[home]
exten => 3500,1,Dial(SIP/3500)
exten => 3500,hint,SIP/3500
exten => 3500,2,Voicemail,u3500
exten =>3500,1,3,hangup
...
In the following example, extension 3500 is used to add Subscribecontext to
point to the context.
This is entered in the file sip.conf:
[3500]
type=friend
secret=3500
callerid="spa3500"<3500>
nat=no
context=home
mailbox=3500
Subscribecontext=home
...
...

Configuring the Cisco SPA500S

Complete the configuration required for the extensions on your IP PBX and obtain
the following information:
• IP PBX IP address or other hostname
• Phone extension numbers
To configure the Cisco SPA500S:
Steps 1 through 4 are only required when the
These steps are not required for other server types such as BroadSoft and
Asterisk.
217.
Server Type field is set to SPA9000.
9
217