Cisco Small Business SPA509G Administration Manual page 23

Getting Started
Using the Web-Based Configuration Utility
STEP 3
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
• Cisco SPA303, Cisco SPA502G, Cisco SPA504G, Cisco SPA508G, Cisco
SPA509G: Press the Setup button, then select Network. The
shows the phone's current IP address.
• WIP310: In the Home screen, press Options and highlight
the Select button.
• Cisco SPA525G/525G2: Press the Setup button, then select Status. Select
Network Status
Enter the IP address in your web browser address bar. For example:
http://192.168.1.8
If your service provider disabled access to the configuration utility, you must
contact the service provider.
If you have trouble accessing the configuration utility, perform the following steps:
Cisco SPA303, Cisco SPA502G, Cisco SPA504G, Cisco SPA508G,
Cisco SPA509G
Press the Setup button on the phone.
Select Network.
Scroll to Enable Web Server and make sure that it is set to Yes. If not, press the
Edit soft key and press y/n soft key to set it to Yes.
Press OK, then press Save.
Cisco SPA501G
Press the Setup button on the phone.
In the IVR menu, enter 7932.
Press 1 to enable the web server, then press #.
To save, press 1; to review, press 2; to re-enter, press 3; to exit, press *.
. The IP address is displayed.
1
Current IP
field
Phone Info
. Press
22