Cisco Small Business SPA509G Administration Manual page 298

Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
LDAP Display Attrs
LDAP Number Mapping
Description
Format of LDAP results display on phone where:
• a—Attribute name
• cn—Common name
• sn—Surname (last name)
• telephoneNumber—Phone number
• n—Display name
For example, n=Phone will cause "Phone:" to be
displayed in front of the phone number of an
LDAP query result when the detail soft button is
pressed.
• t—type
When t=p, that is, t is of type phone number,
then the retrieved number can be dialed. Only
one number can be made dialable. If two
numbers are defined as dialable, only the first
number is used. For example, a=ipPhone, t=p;
a=mobile, t=p;
This example results in only the IP Phone
number being dialable and the mobile number
will be ignored.
• p—phone number
When p is assigned to a type attribute, example t=p,
then the retrieved number will be dialable by the
phone.
Can be blank if not needed.
NOTE With the LDAP number mapping you can
manipulate the number that was retrieved from the
LDAP server. For example, you can append 9 to the
number if your dial plan requires a user to enter 9
before dialing. Add the 9 prefix by adding (<:9xx.>) to
the LDAP Number Mapping field. For example, 555
1212 would become 9555 1212.
If you do not manipulate the number in this fashion, a
user can use the Edit Dial feature to edit the number
before dialing out.
B
297