Ext Status - Cisco Small Business SPA509G Administration Manual

Cisco SPA IP Phone Field Reference
Info Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
RTP Packets Sent
RTP Bytes Sent
RTP Packets Recv
RTP Bytes Recv
SIP Messages Sent
SIP Bytes Sent
SIP Messages Recv
SIP Bytes Recv
External IP
Operational VLAN ID
SW Port (Cisco SPA300
Series and Cisco SPA500
Series)
PC Port (Cisco SPA303 and
Cisco SPA50X)

Ext Status

The following parameters show for each extension on the phone.
Parameter
Registration State
Description
Total number of RTP packets sent (including redundant
packets).
Total number of RTP packets received (including
redundant packets).
Total number of RTP bytes sent.
Total number of RTP bytes received.
Total number of SIP messages sent (including
retransmissions).
Total number of SIP messages received (including
retransmissions).
Total number of bytes of SIP messages sent (including
retransmissions).
Total number of bytes of SIP messages received
(including retransmissions).
External IP address used for NAT mapping.
ID of the VLAN currently in use if applicable.
NOTE Not applicable to WIP310.
Displays the type of Ethernet connection from the IP
phone to the switch.
Indicates whether the link from the IP phone to a device
plugged into the PC port on the phone is up or down.
Description
Shows "Registered" if the phone is registered, "Not
Registered" if the phone is not registered to the ITSP.
B
234