Power Settings (Spa50X/); Pppoe Settings (Cisco Spa525G/525G2 Only) - Cisco Small Business SPA509G Administration Manual

Cisco SPA IP Phone Field Reference
System Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

Power Settings (SPA50X/)

Parameter
PoE Power Required

PPPoE Settings (Cisco SPA525G/525G2 Only)

Parameter
PPPoE Login Name
PPPoE Login Password
PPPoE Service Name
Description
Specifies the PoE power setting: Normal (default) or
Maximum.
When one or more attendant consoles are attached to
the phone, use Maximum to advertise to a PoE switch
that the phone will consume up to 12 W.
When no attendant consoles are attached, use
Minimum to advertise a required power budget of 6.5
Watts.
This parameter is not applicable to SPA301 and
SPA303 because they do not have attendant console
support.
Description
Specifies the account name assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
Specifies the password assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
Specifies the service name assigned by the ISP for
connecting on a Point-to-Point Protocol over Ethernet
(PPPoE) link.
B
241