Using A Bluetooth Headset (Cisco Spa525G/525G2) - Cisco Small Business SPA509G Administration Manual

Administration guide
Hide thumbs Also See for Small Business SPA509G:
Table of Contents

Advertisement

Customizing Cisco SPA and Wireless IP Phones
Configuring Bluetooth (Cisco SPA525G/525G2 only)
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

Using a Bluetooth Headset (Cisco SPA525G/525G2)

To enable a Bluetooth headset from the configuration utility:
Log in to the configuration utility.
Click Bluetooth.
Under Bluetooth Device, choose On.
Under Bluetooth Device List, press Scan for Bluetooth Devices.
In the Bluetooth Device List, click the name of the Bluetooth headset.
Enter the PIN for the Bluetooth headset.
Press Submit All Changes.
To enable a Bluetooth headset from the phone:
Enable Bluetooth as described in the
525G2)" section on page
Press the Setup button.
Scroll to User Preferences and press Select.
Scroll to Bluetooth Configuration and press Select.
Scroll to Bluetooth Mode and press the Right Arrow key to choose one of the
following:
Phone—Your Cisco SPA525G2 will pair with a Bluetooth headset only.
Choose this option if you will not use the Cisco SPA525G2 with a Bluetooth-
enabled mobile phone.
Both—Your Cisco SPA525G2 will use a Bluetooth headset, or operate with
your Bluetooth-enabled mobile phone (see
with a Bluetooth-Enabled Mobile Phone, page
SPA525G2 will connect to only one device at a time (either the Bluetooth
headset or the Bluetooth-enabled mobile phone.)
If multiple Bluetooth devices are in range of the Cisco SPA525G2, the order
of devices in the Bluetooth Configuration > Bluetooth Profiles list is used,
and the device with a higher priority is activated first.
"Enabling Bluetooth (Cisco SPA525G/
80.
Pairing Your Cisco SPA525G2
82). Note that your Cisco
3
81

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents