Viewing The Video - Cisco Small Business SPA509G Administration Manual

Customizing Cisco SPA and Wireless IP Phones
Configuring Video Surveillance on the Cisco SPA525G/525G2
STEP 7
STEP 8
STEP 9
STEP 10
STEP 11
STEP 1
STEP 2
STEP 3
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
rtsp://xxx.xxx.x.xxx/img/jpgvideo.sav
xxx.xxx.x.xxx
where
In the Access User Name field, enter the username for the phone that you created
using the camera's configuration utility.
In the Access Password field, enter the password for the phone username that you
created using the camera's configuration utility.
(Optional) In the Associated Caller ID field, enter the phone number of the phone
associated with the camera. For example, if the camera is located in the lobby, you
may want to enter the extension of the lobby phone if one is installed there. People
monitoring that camera from their phone can press Call to dial the number of the
phone associated with the camera. For example, someone monitoring the lobby
could call the receptionist to identify a visitor.
Repeat Step 4 through Step 8 for each camera.
Click Submit All Changes.

Viewing the Video

To view video from the phone:
Press the Setup button.
Scroll to Video Monitoring and press Select.
Scroll to the camera from which you want to view and press Monitor or Select.
Pressing Call dials the number associated with the camera (see
Information Into the Cisco SPA525G/525G2 Configuration Utility, page
is the IP address of the camera.
3
Entering Camera
100).
101