Vpn Settings (Cisco Spa525G/525G2 Only) - Cisco Small Business SPA509G Administration Manual

Cisco SPA IP Phone Field Reference
SIP Tab
SIP Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

VPN Settings (Cisco SPA525G/525G2 Only)

Parameter
VPN Server
VPN User Name
VPN Password
VPN Tunnel Group
Connect on Bootup
This section describes the fields for the following headings on the SIP tab:
• SIP Parameters, page 246
• SIP Timer Values (sec), page 249
• Response Status Code Handling, page 252
• RTP Parameters, page 253
• SDP Payload Types, page 255
• NAT Support Parameters, page 258
• Linksys Key System Parameters, page 260
Description
The IP address of the VPN server to which the phone
connects.
Username configured on the VPN server for the
phone.
Password associated with the username configured
on the VPN for the phone.
(Optional) The tunnel group, if required by the VPN
server.
If the phone should attempt to connect to the VPN
each time it is powered on. Choose yes to have the
phone try to automatically connect, or no to keep the
default behavior.
B
245