Interdigit Short Timer (Complete Entry Timer); Syntax For The Interdigit Short Timer - Cisco Small Business SPA509G Administration Manual

Configuring Dial Plans
Editing Dial Plans on the IP Phone
Editing Dial Plans on the IP Phone
STEP 1
STEP 2
STEP 3
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

Syntax for the Interdigit Short Timer

SYNTAX 1: S:s, ( dial plan )
•
Use this syntax to apply the new setting to the entire dial plan within the
parentheses.
• SYNTAX 2: sequence Ss
Use this syntax to apply the new setting to a particular dialing sequence.
s: The number of seconds; if no number is entered after S, the default timer
of 5 seconds applies.
Examples for the Interdigit Short Timer
• Set the timer for the entire dial plan.
EXAMPLE: S:6,
9]xxxxxxxxx | 9,8,011xx. | 9,8,xx.|[1-8]xx)
S:6, While entering a number with the phone off hook, a user can pause for
up to 15 seconds between digits before the Interdigit Short Timer expires.
This setting is especially helpful to users such as sales people, who are
reading the numbers from business cards and other printed materials while
dialing.
• Set an instant timer for a particular sequence within the dial plan.
EXAMPLE: (9,8<:1408>[2-9]xxxxxx |
9,8,011xx. | 9,8,xx.|[1-8]xx)
9,8,1[2-9]xxxxxxxxxS0
automatically when the user dials the final digit in the sequence.
You can edit dial plans and can modify the control timers. To edit the dial plans on
the IP phone:
Log in to the configuration utility.
Click Admin Login and advanced.
N
Click the Ext tab, where
(9,8<:1408>[2-9]xxxxxx | 9,8,1[2-
With the timer set to 0, the call is transmitted
N
is the extension being configured.
9,8,1[2-9]xxxxxxxxxS0
8
|
210