Network Configurations - Cisco Small Business SPA509G Administration Manual

Getting Started

Network Configurations

Network Configurations
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
The Cisco SPA IP Phones support Session Initiation Protocol (SIP) or Smart Phone
Control Protocol (SPCP). SPCP is supported only on the Cisco SPA300 Series or
Cisco SPA500 Series IP Phones. You can use the Cisco SPA IP Phones as part of a
Cisco SPA 9000 Voice System phone network, or with any vendor's IP PBX system
that supports SIP. The Cisco SPA IP phones can be used as part of a Cisco
SPA 9000 Voice System phone network, a SIP network, or as part of the Cisco
Unified Communications 500 Series for Small Business.
SPA
IP Phones
IP
PSTN
Gateway
Analog
Phone Lines
Using the Cisco SPA IP Phones as part of a Cisco SPA 9000 Voice System
Network provides seamless integration of advanced features, such as paging, call
pickup, and shared line appearances.
This document describes some common network configurations; however, your
configuration might vary depending on the type of equipment used by your
service provider.
WIP310
Smart
IP PBX
Switch
Wireless
Router
Integrated
Access Device
IAD
Internet
Analog Phones
or Fax Machines
1
14