Response Status Code Handling - Cisco Small Business SPA509G Administration Manual

Cisco SPA IP Phone Field Reference
SIP Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
specified length of time before retrying to REGISTER again. If a RETRY-AFTER
header is not present, the phone waits for the value specified in the
Interval Reg Retry Long Interval
or the

Response Status Code Handling

Parameter
SIT1 RSC
SIT2 RSC
SIT3 RSC
SIT4 RSC
Try Backup RSC
Retry Reg RSC
parameter.
Description
SIP response status code for the appropriate Special
Information Tone (SIT). For example, if you set the SIT1
RSC to 404, when the user makes a call and a failure
code of 404 is returned, the SIT1 tone is played.
Reorder or Busy Tone is played by default for all
unsuccessful response status code for SIT 1 RSC
through SIT 4 RSC.
Defaults to blank.
SIP response status code to INVITE on which to play
the SIT2 Tone.
Defaults to blank.
SIP response status code to INVITE on which to play
the SIT3 Tone.
Defaults to blank.
SIP response status code to INVITE on which to play
the SIT4 Tone.
Defaults to blank.
SIP response code that retries a backup server for the
current request.
Defaults to blank.
Interval to wait before the SPA9000 retries registration
after failing during the last registration.
Defaults to blank.
B
Reg Retry
252