Cisco Small Business SPA509G Administration Manual page 309

Cisco SPA IP Phone Field Reference
Ext Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Voice Quality Report Address
Description
For configuration of a SIP event package, SIP PUBLISH,
that enables the collection and reporting of metrics
that measure the quality for VoIP sessions. Voice call
quality information derived from RTCP-XR and call
information from SIP is conveyed from a User Agent in
a session to the third party in SIP PUBLISH method.
To configure, first configure RTCP-XR (see the
Parameters" section on page
need to configure the RTCP Tx Interval. In the Voice
Quality Report Address field, enter the name of the
collector that will collect the statistics from the SIP
PUBLISH events. For example, enter
fully-qualified-domain-name
collector@
(collector@reports.cisco.com) or
collector IP address
@ - (collector@192. 1 68.5. 1 ).
After RTCP-XR feature is enabled, the call status
information is updated on the Voice > Info page during
an active call. Additionally, RTCP-XR packets
containing a voice metrics block report will be sent
with the interval specified in the RTCP Tx Interval.
When the call session is ended, a SIP PUBLISH with
voice metrics info is sent to the collector endpoint.
This parameter supports a full SIP URI. Examples of
valid addresses are:
• collector@domain.com
• 123.collect@123. 1 23. 1 23. 1 23:5555
• 5678@domain.com:5656
For example to configure for extension 1, edit the
phone's configuration file as follows:
<Voice_Quality_Report_Address_1_
ua="na">collector@domain.com
</Voice_Quality_Report_Address_1_>
or
<Voice_Quality_Report_Address_1_
ua="na">123.collect@123.123.123.123:5555
</Voice_Quality_Report_Address_1_>
or
<Voice_Quality_Report_Address_1_
ua="na">5678@domain.com:5656
</Voice_Quality_Report_Address_1_>
B
"RTP
253). For example, you
308