Cisco SPA IP Phone Field Reference
Provisioning Tab
Provisioning Tab
NOTE
Regional Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Linksys Key System Parameters
Parameter
Linksys Key System
Multicast Address
Key System Auto Discovery
Key System IP Address
Force LAN Codec
For information about the Provisioning page, see the Cisco Small Business IP
Telephony Devices Provisioning Guide.
This section describes the fields for the following headings on the Regional tab:
•
Call Progress Tones, page 261
•
Distinctive Ring Patterns, page 264
•
Control Timer Values (sec), page 265
Description
Enable or disable the Linksys Key System on the IP
phone.
Defaults to yes.
The multicast address is used by the Cisco SPA 9000
to communicate with the Cisco SPA IP phones.
Defaults to 224. 1 68. 1 68. 1 68:6061.
Enables or disables auto discovery of the call control
server (for example, the Cisco SPA 9000). Disable this
feature for teleworkers or other scenarios where
multicast does not work.
IP address of the call control server IP. Enter the IP
address for teleworkers or other scenarios where
multicast does not work.
The choices are: none, G.711u, or G.711a. Defaults to
none.
B
260