Pairing Your Cisco Spa525G2 With A Bluetooth-Enabled Mobile Phone - Cisco Small Business SPA509G Administration Manual

Customizing Cisco SPA and Wireless IP Phones
Configuring Bluetooth (Cisco SPA525G/525G2 only)
STEP 6
STEP 7
NOTE
STEP 8
STEP 9
STEP 10
STEP 11
NOTE
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Scroll to Bluetooth Profiles and press the Right Arrow key to enter the profile
screen.
Press Scan to scan for your headset.
Depending on the network environment (for example, the number of Bluetooth
devices and noise level), your Bluetooth headset may not appear on the found
devices list. Ensure the headset is powered on and has Bluetooth activated, and
retry the scan.
In the list of found devices, select your headset and press the Select button to edit
the profile.
Scroll to PIN and enter the PIN for your Bluetooth headset.
Scroll to Connect Automatically and press the Right Arrow key to turn to On.
Press Connect. The profile screen displays and a check mark appears next to the
headset if the connection was successful.
Pairing Your Cisco SPA525G2 with a Bluetooth-Enabled
Mobile Phone
This feature is based on the following standard Bluetooth profiles:
• Phone Book Access Profile 1.0
• Handsfree Profile 1.5
• Handset Profile 1. 1
Make sure your mobile phone provides support for the above profiles. Cisco
provides a reference list of Bluetooth-enabled mobile phones supported with the
Cisco SPA525G2. See the Cisco support community at
smallbizsupport and also consult the latest Cisco SPA525G2 release notes,
available at cisco.com.
For more detailed instructions, including screen shots, see the
Business SPA525/525G2 User Guide (SIP)
Manager Express for the Cisco Small Business IP Phone SPA525G/525G2 (SPCP)
User Guide
.
To pair your Cisco SPA525G2 with your Bluetooth-enabled mobile phone, you can
either initiate pairing from the Cisco SPA525G2, or from your mobile phone.
http://www.cisco.com/go/
Cisco Small
Cisco Unified Communications
or the
3
82