Connect To The Network; Connect With Activation Code Onboarding; Connect To Expressway - Cisco 7800 Series User Manual

CISCO 7800 SERIES
Step 5 Turn the footstand over.
Step 6
Push the footstand back into the phone until the stand locks into place.
Step 7 Place the phone upright and plug it into the network.

Connect to the Network

You need to connect the phone to the network.
• Wired network connection—The phone is plugged into the network with an Ethernet cable.
Mobile and Remote Access Through Expressway—If your administrator sets up Mobile and Remote Access
Through Expressway and you connect your phone to the network, it connects to the Expressway server
automatically.

Connect with Activation Code Onboarding

If your network has been configured to support this feature, then you can use Activation Code Onboarding
to connect to your company's phone network.
Enter an Activation Code
Activation codes are used to set up your new phone. They can only be used once, and expire after 1 week.
Contact your administrator if you don't know your code or if you need a new one.
Procedure
Step 1
Enter your activation code on the activation screen.
Step 2 Press Submit.

Connect to Expressway

You can use Mobile and Remote Access Through Expressway to connect into your corporate network when
you are working away from your office. Because your phone does not have a TFTP address configured, the
phone displays a Welcome screen to begin the sign-in process.
Before you begin
If you have been using your phone at the office or with a VPN, reset your service mode before you connect
to Expressway.
If you need to connect to Mobile and Remote Access Through Expressway on-premise, restart your phone
and press Select when prompted.
Procedure
Step 1 Enter your activation code or service domain on the Welcome screen and press Continue.
GoMomentum.com 5
USER GUIDE
888.538.3960