Configuring the AAA Server
Step 3
Configuring Accounting Settings on the TACACS+ Server
Step 1
Step 2
Step 3
Step 4
Cisco 4700 Series Application Control Engine Appliance Security Configuration Guide
2-12
Key—Enter the shared secret that the ACE and Cisco Secure ACS use to
•
authenticate transactions. You must specify the identical shared secret on
both the Cisco Secure ACS and the ACE. The key is case sensitive.
Authenticate Using—Choose TACACS+ (Cisco IOS).
•
The TACACS+ (Cisco IOS) drop-down item is the title for the Cisco
Note
TACACS+ authentication function. The TACACS+ (Cisco IOS) selection
activates the TACACS+ option when using Cisco Systems access servers,
routers, and firewalls that support the TACACS+ authentication protocol.
This includes support with an ACE as well.
Click Submit + Restart.
To configure the TACACS+ accounting service for the Cisco Secure ACS,
perform the following steps:
In the System Configuration section of the Cisco Secure ACS interface, the
Logging Configuration page, click CSV TACACS+ Accounting. The CSV
TACACS+ Accounting File Configuration page appears.
Confirm that the Log to CSV TACACS+ Accounting report check box is
checked.
Under Select Columns To Log, in the Attributes column, click the attribute that
you want to log. Click -> to move the attribute into the Logged Attributes column.
Click Up or Down to move the column for this attribute to the desired position in
the log. Repeat until all the desired attributes are in the desired positions in the
Logged Attributes column.
Click Submit when you finish moving the attributes into the Logged Attributes.
Chapter 2
Configuring Authentication and Accounting Services
OL-16202-01