Displaying Global Context Connection Statistics - Cisco 4700M Configuration Manual

Displaying Configurations and Statistics for TCP/IP and UDP Connections, IP Reassembly, and SYN Cookie

Displaying Global Context Connection Statistics

Cisco 4700 Series Application Control Engine Appliance Security Configuration Guide
4-54
Chapter 4
You can display global connection statistics for the current context by using the
show stats connection command in Exec mode. The syntax of this command is
as follows:
show stats connection
For example, to display global connection statistics for the Admin context, enter
the following command:
host1/Admin# show stats connection
Table 4-9 describes the fields in the show stats connection command output.
Table 4-9 Field Descriptions for the show stats connection Command
Output
Field Description
Total Total number of connections that were created in the current
Connections context. This number is the sum of the Total Connections
Created Current, Total Connections Destroyed, Total Connections
Timed-out, and Total Connections Failed.
Total Total number of existing connections to the current context.
Connections
Current
Total Total number of connections that were torn down in the
Connections current context.
Destroyed
Total Total number of connections that exceeded the configured
Connections timeout in the current context.
Timed-out
Total Total number of connection attempts that failed to complete.
Connections
Failed
Configuring TCP/IP Normalization and IP Reassembly Parameters
OL-16202-01