Clearing TCP/IP and UDP Connections and Statistics
Clearing TCP Statistics
Note
Clearing UDP Statistics
Note
Cisco 4700 Series Application Control Engine Appliance Security Configuration Guide
4-66
Chapter 4
You can clear TCP statistics by using the clear tcp statistics command in Exec
mode. This command clears all statistics associated with TCP connections and
normalization in the current context. The syntax of this command is as follows:
clear tcp statistics
For example, to clear TCP statistics in the current context, enter:
host1/C1# clear tcp statistics
If you configured redundancy, then you need to explicitly clear TCP statistics on
both the active and the standby ACEs. Clearing statistics on the active appliance
alone will leave the standby appliance's statistics at the old values.
You can clear UDP statistics by using the clear udp statistics command in Exec
mode. This command clears all statistics associated with UDP connections in the
current context. The syntax of this command is as follows:
clear udp statistics
For example, to clear UDP statistics in the current context, enter:
host1/C1# clear udp statistics
If you configured redundancy, then you need to explicitly clear UDP statistics on
both the active and the standby ACEs. Clearing statistics on the active appliance
alone will leave the standby appliance's statistics at the old values.
Configuring TCP/IP Normalization and IP Reassembly Parameters
OL-16202-01