Clearing TCP/IP and UDP Connections and Statistics
Clearing TCP/IP and UDP Connections and Statistics
Clearing Connections
Cisco 4700 Series Application Control Engine Appliance Security Configuration Guide
4-64
Chapter 4
The following sections describe the commands that you can use to clear
connections and statistics related to TCP/IP and UDP connections, IP reassembly,
and SYN Cookie.
Clearing Connections
•
Clearing Connection Statistics
•
Clearing IP, TCP, and UDP Statistics
•
Clearing IP Fragmentation and Reassembly Statistics
•
Clearing SYN Cookie Statistics
•
You can clear ICMP, TCP, and UDP connections by using the clear conn
command in Exec mode. The syntax of this command is as follows:
clear conn [all | flow {icmp | tcp | udp} | rserver]
The keywords are as follows:
all—(Optional) Clears all connections to and through the ACE in the current
•
context.
flow {icmp | tcp | udp}—(Optional) Clears all connections of the specified
•
flow type: ICMP, TCP, or UDP.
rserver—(Optional) Clears all connections for the specified real server.
•
For example, to clear all TCP connections in the current context, enter:
host1/C1# clear conn flow tcp
Configuring TCP/IP Normalization and IP Reassembly Parameters
OL-16202-01