Displaying Tacacs+ Server Configuration Information - Cisco 4700M Configuration Manual

Chapter 2 Configuring Authentication and Accounting Services

Displaying TACACS+ Server Configuration Information

OL-16202-01
You can display the configured TACACS+ server and group parameters by using
the show tacacs-server command.
The syntax of this command is as follows:
show tacacs-server [groups | sorted]
The optional keywords are as follows:
groups—(Optional) Displays configured TACACS+ server group
•
information.
sorted—(Optional) Displays TACACS+ server information sorted by name.
•
For example, to display the configured TACACS+ server parameters, enter:
host1/Admin# show tacacs-server
Global TACACS+ shared secret:tacacsPword
timeout value:30
total number of servers:3
following TACACS+ servers are configured:
192.168.58.91:
available on port:2
cisco.com:
available on port:49
192.168.22.95:
available on port:49
TACACS+ shared secret:MyKey
For example, to display the configured TACACS+ server groups, enter:
host1/Admin# show tacacs-server groups
total number of groups:1
following TACACS+ server groups are configured:
group TacServers:
server 192.168.58.91 on port 2
For example, to display the sorted TACACS+ servers, enter:
host1/Admin# show tacacs-server sorted
timeout value:1
total number of servers:1
Cisco 4700 Series Application Control Engine Appliance Security Configuration Guide
Viewing AAA Status and Statistics
2-51