Cisco 4700M Configuration Manual page 309

Chapter 4 Configuring TCP/IP Normalization and IP Reassembly Parameters
Displaying Configurations and Statistics for TCP/IP and UDP Connections, IP Reassembly, and SYN Cookie
Table 4-7
Field
Tcp-options drop
range
Tcp-options
allow range
Tcp-options clear
range
Selective-ack
Timestamp
Window-scale
Window-scale
factor
Reserved-bits
Random-seq-
num
SYN data
Exceed-mss
urgent-flag
conn-rate-limit
bandwidth-rate-
limit
Cisco 4700 Series Application Control Engine Appliance Security Configuration Guide
OL-16202-01
Field Descriptions for the show parameter-map Command
Output (continued)
Description
Range of numbers representing the TCP options that the
ACE drops.
Range of numbers representing the TCP options that the
ACE allows. Possible values are 6 or 7 and from 9 to 255.
Range of numbers representing the TCP options that the
ACE clears. Possible values are 6 or 7 and from 9 to 255.
Configured action that the ACE performs for the selective
acknowledgement TCP option. Possible actions are allow or
clear.
Configured action that the ACE performs for the time-stamp
TCP option. Possible actions are allow or clear.
Configured action that the ACE performs for the window
scale TCP option. Possible actions are allow, clear, or drop.
Value of the set tcp window-scale command. Possible
values are from 0 to 14.
Configured action for the reserved-bits command. Possible
actions are allow, clear, or drop.
Configured state of the random-sequence-number
command. Possible states are enabled or disabled.
Configured action for the syn-data command. Possible
actions are allow or drop.
Configured action for the exceed-mss command. Possible
actions are allow or drop.
Configured action for the urgent-flag command. Possible
values are allow or clear.
Configured maximum number of connections per second
that the ACE allows.
Configured maximum number of bytes per second that the
ACE allows.
4-51