Configuring Static NAT and Static Port Redirection
Configuring Static NAT and Static Port Redirection
Static NAT Configuration Quick Start
Cisco 4700 Series Application Control Engine Appliance Security Configuration Guide
5-32
This section describes how to configure static NAT and static port redirection on
an ACE for DNAT. For overview information about static NAT and static port
redirection, see the
"Network Address Translation Overview"
section contains the following topics:
Static NAT Configuration Quick Start
•
•
Configuring an ACL for Static NAT and Static Port Redirection
Configuring a Class Map
•
Configuring a Policy Map
•
Configuring Static NAT and Static Port Redirection as a Policy Action
•
Applying the Static NAT and Static Port Redirection Policy Map to an
•
Interface Using a Service Policy
Table 5-3
provides a quick overview of the steps required to configure static NAT
and static port redirection. Each step includes the CLI command or a reference to
the procedure required to complete the task. For a complete description of each
feature and all the options associated with the CLI commands, see the sections
following
Table
5-3.
Chapter 5
Configuring Network Address Translation
section. This
OL-16202-01