Displaying Service Policy Configuration Information - Cisco 4700M Configuration Manual

Viewing Application Protocol Inspection Statistics and Service Policy Information

Displaying Service Policy Configuration Information

Cisco 4700 Series Application Control Engine Appliance Security Configuration Guide
3-130
Table 3-9 Field Descriptions for show stats inspect http Command
Field
Total Request/Response
Total Allow Decisions
Total Drop Decisions
Total Logging Decisions Total number of syslog messages generated to track
You can display service policy statistics by using the show service-policy
command in Exec mode. The statistics that appear in the output are dependent on
the configuration of the associated Layer 3 and Layer 4 policy map. The show
service-policy command displays the following information:
VLAN to which the policy is applied
•
Class map associated with the policy
•
Status of any load-balancing operations
•
The syntax of this command is as follows:
show service-policy policy_name [detail]
The keywords, arguments, and options are as follows:
policy_name—Identifier of an existing policy map that is currently in service
•
(applied to an interface) as an unquoted text string with a maximum of
64 alphanumeric characters.
detail—(Optional) Displays a more detailed listing of policy map statistics
•
and status information.
Chapter 3 Configuring Application Protocol Inspection
Description
Total number of FTP, HTTP, or RTSP packet requests
or responses processed by the ACE.
Total number of FTP, HTTP, or RTSP packets
inspected and allowed by the ACE.
Total number of FTP, HTTP, or RTSP okpackets
inspected and denied by the ACE.
the action taken by the ACE on the matching HTTP
traffic. Logging is enabled as an action in the
associated HTTP inspection policy map. This field is
displayed only for the http keyword.
OL-16202-01