Associating An Sccp Parameter Map With A Layer 3 And Layer 4 Policy Map; Configuring A Sip Parameter Map - Cisco 4700M Configuration Manual

Configuring a SIP Parameter Map

Configuring a SIP Parameter Map
Cisco 4700 Series Application Control Engine Appliance Security Configuration Guide
3-116
The name argument is the name of an existing SCCP parameter map. Parameter
maps aggregate SCCP traffic-related actions together. Enter the name of an
existing SCCP parameter map as an unquoted text string with no spaces and a
maximum of 64 alphanumeric characters. For details about configuring an SCCP
parameter map, see the
For example, to specify the appl-parameter skinny advanced-options command
as an action for the SCCP deep packet inspection policy map, enter:
host1/Admin(config)# policy-map multi-match SCCP_INSPECT_L4POLICY
host1/Admin(config-pmap)# class SCCP_INSPECT_L4CLASS
host1/Admin(config-pmap-c)# appl-parameter skinny advanced-options
SCCP_PARAM_MAP1
To dissociate the SCCP parameter map as an action from the SCCP packet
inspection policy map, enter:
host1/Admin(config-pmap-c)# no appl-parameter skinny advanced-options
SCCP_PARAM_MAP1
You can use a parameter map to combine related actions for use in a Layer 3 and
Layer 4 SIP deep packet inspection policy map. You reference this parameter map
in the appl-parameter command in policy map class configuration mode. See the
"Associating a SIP Parameter Map with a Layer 3 and Layer 4 Policy Map"
section.
This section contains the following topics:
SIP Inspection Configuration Considerations
•
• Creating a SIP Parameter Map
Configuring a Timeout for a SIP Media Secure Port
•
Enabling Instant Messaging
•
Enabling Maximum Forward Field Validation
•
Configuring User Agent Software Version Options
•
Enabling Strict Header Validation
•
Enabling Non-SIP URI Detection in SIP Messages
•
Associating a SIP Parameter Map with a Layer 3 and Layer 4 Policy Map
•
Chapter 3 Configuring Application Protocol Inspection
"Configuring an SCCP Parameter Map" section.
OL-16202-01