Cisco 4700M Configuration Manual page 288

Configuring a Traffic Policy for TCP/IP Normalization and Termination
Table 4-4
Keyword
pop3
rtsp
sip
skinny
smtp
telnet
www
Table 4-5
Keyword
domain
ras
sip
wsp
wsp-wtls
wsp-wtp
wsp-wtp-wtls
•
You can have multiple match port commands within a single class map. Also,
you can combine other match commands with the match port command in the
same class map.
The following example specifies that the network traffic must match on TCP port
number 23 (Telnet client):
host1/C1(config)# class-map TCP_CLASS
host1/C1(config-cmap)# match port tcp eq 23
Cisco 4700 Series Application Control Engine Appliance Security Configuration Guide
4-30
Chapter 4
Well-Known TCP Port Numbers and Keywords (continued)
Port Number
110
554
5060
2000
25
23
80
Well-Known UDP Port Numbers and Keywords
Port Number
53
1719
5060
9200
9202
9201
9203
range port2 port3—Specifies a port range to use for the TCP or UDP port.
Enter an integer from 0 to 65535. A value of 0 instructs the ACE to match any
port.
Configuring TCP/IP Normalization and IP Reassembly Parameters
Description
Post Office Protocol v3
Real Time Streaming Protocol
Session Initiation Protocol
Skinny Client Control Protocol (SCCP)
Simple Mail Transfer Protocol
Telnet
World Wide Web
Description
Domain Name System
H.323 RAS protocol
Session Initiation Protocol (SIP)
Connectionless Wireless Session Protocol
(WSP)
Secure Connectionless WSP
Connection-based WSP
Secure Connection-based WSP
OL-16202-01