Cisco 4700M Configuration Manual page 308

Displaying Configurations and Statistics for TCP/IP and UDP Connections, IP Reassembly, and SYN Cookie
Table 4-7
Field
Parameter map
Type
Nagle
Slow start
Inactivity
timeout
(seconds)
Embryonic
timeout
(seconds)
Ack-delay
WAN
optimization RTT
(milliseconds)
Half-closed
timeout
(seconds)
TOS rewrite
SYN retry count
TCP MSS min
TCP MSS max
Cisco 4700 Series Application Control Engine Appliance Security Configuration Guide
4-50
Chapter 4 Configuring TCP/IP Normalization and IP Reassembly Parameters
Field Descriptions for the show parameter-map Command
Output
Description
Name of the connection parameter map.
Connection.
Status of the nagle command: enabled or disabled.
Status of the slow start command: enabled or disabled.
Configured number of seconds after which an inactive
connection times out. Possible values are from 0 to 1638050
. If the set timeout inactivity command is not configured,
the default values in seconds appear, as follows:
ICMP—2
•
TCP—3600
•
UDP—120
•
Configured number of seconds after which an incomplete
TCP handshake times out. Possible values are from 0 to
4294967295.
Configured number of seconds that the ACE delays sending
an ACK from a client to a server.
Configured number of milliseconds that determines how the
ACE applies TCP optimizations to packets on a connection
that is associated with a Layer 7 policy.
Number of seconds after which a half-closed connection
times out. Possible values are from 0 to 4294967295.
State of the set ip tos command: enabled or disabled.
State of the set tcp syn-retry command: enabled or
disabled.
Minimum value of the TCP maximum segment size that the
ACE accepts. Possible values are from 0 to 65535.
Maximum value of the TCP maximum segment size that the
ACE accepts. Possible values are from 0 to 65535.
OL-16202-01