Displaying A Connection Parameter Map - Cisco 4700M Configuration Manual

Chapter 4 Configuring TCP/IP Normalization and IP Reassembly Parameters
Displaying Configurations and Statistics for TCP/IP and UDP Connections, IP Reassembly, and SYN Cookie

Displaying a Connection Parameter Map

OL-16202-01
show running-config interface—Displays all interface VLAN
•
configurations in the current context
For example, to display all policy maps in the current context, enter:
host1/C1# show running-config policy-map
You can display a connection parameter map configuration by using the show
parameter-map command in Exec mode. The syntax of this command is as
follows:
show parameter-map name
The name argument is the name of an existing connection parameter map. Enter
the name as an unquoted text string with no spaces and a maximum of
64 alphanumeric characters.
For example, to display a connection parameter map configuration, enter:
host1/C1# show parameter-map CONN_PMAP
Table 4-7 describes the fields in the show parameter-map command output.
Cisco 4700 Series Application Control Engine Appliance Security Configuration Guide
4-49