Displaying Authentication Configuration Information - Cisco 4700M Configuration Manual

Viewing AAA Status and Statistics

Displaying Authentication Configuration Information

Cisco 4700 Series Application Control Engine Appliance Security Configuration Guide
2-54
The ACE does not save the following CLI commands in the accounting log
because the commands are handled by VSH and they do not go through the
accounting framework:
clear screen
•
config terminal
•
• (no) debug
end
•
exit
•
show debug
•
show terminal
•
terminal (no)
•
(no) username
•
xml-show on
•
xml-show off
•
xml-show status
•
You can display authentication configuration information for the ACE by using
the show aaa authentication command.
The syntax of this command is as follows:
show aaa authentication [login error-enable]
The optional login error-enable keyword allows you to view the current display
status of the login error message.
For example, to display the configured authentication parameters, enter:
host1/Admin# show aaa authentication
default: group TacServers local none
console: local
host1/Admin# show aaa authentication login error-enable
enabled
Chapter 2 Configuring Authentication and Accounting Services
OL-16202-01