Cisco 4700M Configuration Manual page 316

Displaying Configurations and Statistics for TCP/IP and UDP Connections, IP Reassembly, and SYN Cookie
Displaying IP Fragmentation and Reassembly Statistics
Cisco 4700 Series Application Control Engine Appliance Security Configuration Guide
4-58
Chapter 4
Table 4-10 Field Descriptions for the show ip traffic Command Output
Field Description
TCP Statistics
Rcvd Total number of TCP segments and errors received by the
ACE.
Sent Total number of TCP segments sent by the ACE.
UDP Statistics
Rcvd Total number of UDP segments, UDP errors, and segments
with no port number received by the ACE.
Sent Total number of UDP segments sent by the ACE.
ARP Statistics
Rcvd Number of ARP packets, errors, requests, and responses
received by the ACE.
Sent Number of ARP packets, errors, requests, and responses sent
by the ACE.
You can display IP fragmentation and reassembly statistics for all interfaces in the
ACE or the specified interface by using the show fragment command in Exec
mode. The syntax of this command is as follows:
show fragment [vlan vlan_id]
For the optional vlan_id argument, enter the unique identifier of an existing
interface as an integer from 2 to 4094. If you omit the vlan keyword and vlan_id
argument, you can display statistics for all interfaces in the ACE.
For example, to display IP fragmentation and reassembly statistics for all
interfaces in the ACE, enter:
host1/C1# show fragment
Configuring TCP/IP Normalization and IP Reassembly Parameters
OL-16202-01