Displaying Udp Statistics - Cisco 4700M Configuration Manual

Displaying Configurations and Statistics for TCP/IP and UDP Connections, IP Reassembly, and SYN Cookie

Displaying UDP Statistics

Cisco 4700 Series Application Control Engine Appliance Security Configuration Guide
4-60
Chapter 4
Table 4-12 describes the fields in the show tcp statistics command output.
Table 4-12 Field Descriptions for the show tcp statistics Command Output
Field Description
Rcvd Total number of TCP segments and errors received by the
ACE.
Sent Total number of TCP segments, reset flag segments, active
opens, and passive opens sent by the ACE.
Connections Number of failed connection attempts, established
connections that were reset, and currently established
connections.
You can display UDP statistics by using the show udp statistics command in Exec
mode. This command displays statistics for traffic destined to the ACE, rather
than through the ACE. The syntax of this command is as follows:
show udp statistics
For example, to display UDP statistics for the current context, enter:
host1/C1# show udp statistics
Table 4-13 describes the fields in the show udp statistics command output.
Table 4-13 Field Descriptions for the show udp statistics Command
Output
Field Description
Rcvd Total number of UDP segments, errors, and segments with
no port specified that the ACE received.
Sent Total number of UDP segments sent by the ACE.
Configuring TCP/IP Normalization and IP Reassembly Parameters
OL-16202-01