Adding A Description To The Layer 7 Sccp Inspection Policy Map - Cisco 4700M Configuration Manual

Chapter 3 Configuring Application Protocol Inspection
Configuring a Layer 7 SCCP Inspection Policy
The map_name argument is the name assigned to the policy map. Enter an
unquoted text string with no spaces and a maximum of 64 alphanumeric
characters.
For example, to create a Layer 7 SCCP inspection policy map, enter:
host1/Admin(config)# policy-map type inspect skinny
SCCP_INSPECT_L7POLICY
host1/Admin(config-pmap-ins-skinny)#
To remove the Layer 7 SCCP inspection policy map from the configuration, enter:
host1/Admin(config)# no policy-map type inspect skinny
SCCP_INSPECT_L7POLICY

Adding a Description to the Layer 7 SCCP Inspection Policy Map

You can add a description to a Layer 7 SCCP inspection policy map by using the
description command in policy map inspection Skinny configuration mode. The
syntax of this command is as follows:
description
For example, enter:
host1/Admin(config-pmap-ins-skinny)# description this is an SCCP
inspection policy map
To remove the policy map description from the configuration, enter:
host1/Admin(config-pmap-ins-skinny)# no description
Cisco 4700 Series Application Control Engine Appliance Security Configuration Guide
3-71
OL-16202-01