Downloadable PIX ACLs
Downloadable PIX ACL Configuration
Adding a Downloadable PIX ACL
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
User Guide for Cisco Secure ACS for Windows Server
5-4
This section contains the following procedures:
Adding a Downloadable PIX ACL, page 5-4
•
Editing a Downloadable PIX ACL, page 5-5
•
•
Deleting a Downloadable PIX ACL, page 5-5
To add a downloadable PIX ACL, follow these steps:
In the navigation bar, click Shared Profile Components.
Result: The Shared Profile Components page appears.
Click Downloadable PIX ACLs.
Click Add.
Result: The Downloadable PIX ACLs page appears.
In the Name: box, type the name of the new PIX ACL.
The name of a PIX ACL may contain up to 32 characters. The name may
Note
contain spaces; but it cannot contain leading, trailing, or multiple spaces,
or the following characters: - [ ] / —
In the Description: box, type a description of the new PIX ACL.
In the ACL Definitions box, type the new PIX ACL definitions.
In entering the ACL definitions in the ACS HTML interface, you do not
Note
use keyword and name entries; rather, you begin with a permit/deny
keyword. For an example of the proper format of the ACL definitions, see
About Downloadable PIX ACLs, page
Chapter 5
Setting Up and Managing Shared Profile Components
5-2.
78-14696-01, Version 3.1