Honeywell HEN04101(X) User Manual page 85

Configuring the FTP Settings
You need to download or buy an FTP service tool (such as Ser-U FTP SERVER, used as an
example below) to have FTP service.
Installing the 1.
FTP service tool
Table 3-20 Email Configurations
Parameter
Receiver
SSL enable
Event Interval
Health email enable
Interval
 
Go to Start Program Serv-U FTP SERVER
Figure 3-40 Configuring FTP
Description
Enter the receiver's email address. You can enter up to 3 email
addresses.
The NVR supports an SSL encryption box.
The interval for sending ranges from 0 to 3600 seconds. 0
means that there is no interval.
Click to enable the email health check. The NVR sends a test
email to check the network connection.
After enabling Health Enable, you can configure how
frequently the NVR sends out emails to test the network
connection.
Click Test to send a test email. A popup message appears to
indicate the state of the network connection.

Serv-U Administrator.
NVR Configurations | 85
800-18160 - B - 07/2014