Honeywell HEN04101(X) User Manual page 61

Figure 3-23 General Settings Interface
Table 3-8 General Settings
Setting Description
System time Configure the system time.
Date format Select from three formats: YYYY-MM-DD, MM-DD-YYYY, or
DD-MM-YYYY.
Date separation Select from three formats: dot (.), hyphen (-), or slash (/).
format
Daylight Saving Configure the DST time and date.
Time (DST)
1. Enable DST, then click Set. The DST interface appears.
2. Configure the Start time and End time by either configuring the
3. Click OK to save the new settings.
Week setup, as shown above. Or by configuring the date
setup, as shown below.
NVR Configurations | 61
800-18160 - B - 07/2014