Upgrading The Ip Devices (Batch Upgrade) - Honeywell HEN04101(X) User Manual

Upgrading the IP Devices (Batch Upgrade)

1.
2.
If you do not select a device before clicking Login, you will get a Connection
Note
Error.
Note For the following, examples of upgrading an IP camera are shown. The
procedures for upgrading an NVR are similar.
Open the ConfigTool software if it is not already open.
Figure 4-10 ConfigTool Login
Click Upgrade to begin the batch upgrading process.
The Upgrade interface appears.
Honeywell Configuration Tool | 133
800-18160 - B - 07/2014