Honeywell HEN04101(X) User Manual page 180

180 | Performance Series Network Video Recorder User Guide
www.honeywell.com/security
Figure 5-43 Local Alarm Configuration Interface
Table 5-19 Local Alarm Configurations
Configuration
Enable
Period
Type
Record Channel
Delay
Description
Click to enable local alarms. Select a channel from the
drop-down list.
Define a period during which local alarms are active.
1. Click Set. The Set configuration interface appears.
2. Select a time period.
Note You can configure up to 6 periods within one day.
3. Select a date. If you do not select a date, the current setup
will apply to today only.
Note You can select All Week if you want these settings to
apply to the whole week.
4. Click OK, then click Save.
Select from NO or NC.
When an alarm occurs, the system automatically records
motion detection channels.
Note You need to set the motion detection recording period.

Go to Storage Schedule to configure the current channel
for scheduled recording. See
Schedules on page 187.
The system can delay recording for a specified amount of time
after an alarm has ended. Select from 10s to 300s.
Configuring Local Storage for