Problem: The Nvr Cannot Detect The Hard Disk; Problem: The Real-Time Video Color Is Distorted; Problem: Motion Detection Does Not Work - Honeywell HEN04101(X) User Manual

206 | Performance Series Network Video Recorder User Guide

Problem: The NVR cannot detect the hard disk

Possible solutions:
•
•
•

Problem: The real-time video color is distorted

Possible solutions:
•
•
•
•

Problem: Motion detection does not work

Possible solutions:
•
•
•
www.honeywell.com/security
Check the HDD cable connection.
Check the HDD and HDD ribbon. They might be damaged and require replacement.
Replace the Main board SATA port.
Check the NTSC and PAL setup when using the BNC output. If this setup is incorrect, the
real-time video appears black and white.
Check the compatibility of the resistance between the NVR and the monitor.
Check the video transmission. The clip might be too long or there is a lot of file
degradation.
Check the NVR's color and/or brightness settings.
Check that the period setup is correct. [Motion detection active period?] See
the Schedule on page 66.
Check the motion detection zone setup.
Check that the motion sensitivity level is not too low.
Configuring