Configuring Default Settings - Honeywell HEN04101(X) User Manual

108 | Performance Series Network Video Recorder User Guide

Configuring Default Settings

Click the DEFAULT icon
interface.
In the Default interface, you can click to select what parameters are returned to their default
settings. Choose from:
•
•
•
•
•
•
•
•
•
•
•
www.honeywell.com/security
Table 3-26 Display Configurations
Configuration
Resolution
Image Enhance
Enable Tour
Interval
Monitor Tour Type
Alarm Tour Type
Note You must click Save after configuring the settings to save them.
Select All
General
Remote Device
Schedule
RS232
Network
Alarm
Detect
Pan/Tilt/Zoom
Display
Channel Name
Description
Select from four options: 1920x1080 (default), 1280x1024,
1280x720, and 1024x768.
Click to enable.
Click to enable.
The system supports a 1/4-window tour. Enter a time interval
for switching from one channel to the next in a tour. Select
from 5 to 120 seconds. If enabled here, your NVR will
automatically start Interval view when the display is switched
to single-channel mode.
While in a tour, you can use the mouse or click Shift to turn on
the window switch function.
switch function, is the icon for the closing switch function.
The system supports 1/8-window tour.
The system supports 1/8-window tour.
in the Setting interface to open the Default configuration
is the icon for the opening