Honeywell HEN04101(X) User Manual page 80

80 | Performance Series Network Video Recorder User Guide
Double-click the UPnP item in the list to configure it. A configuration window appears.
www.honeywell.com/security
Figure 3-34 UPNP Configuration Interface
Table 3-18 UPnP Configurations
Parameter
UPnP On/Off
Status
Router LAN IP
WAN IP
Port Mapping list (PAT
Table)
Enable Switch
List
Default
Add to the List
Delete
Function
Turn On or Off the UPnP function.
Displays Unknown when the UPnP is offline. Displays
Success when the UPnP is working.
The router IP in the LAN.
The router IP in the WAN.
This is the one-to-one relationship with the router's port
mapping setting.

A check mark in the box
enabled for this port.
Service Name: Defined by the user.
Protocol: The protocol type.
Internal port: The port that has been mapped in the router.
External port: The port that has been mapped locally.
Click to restore the UPnP default port settings, which is the
HTTP, TCP, and UDP for the NVR.
Click to add the mapping relationship.
Click to remove a mapping item.
❐
indicates that port mapping is