Click Multicast in the Network configuration interface to open the Multicast configuration
interface.
Configuring Auto Registration Settings
Auto Register allows the device to automatically register to the proxy you have specified. This
allows you to use the client-end to access the NVR through the proxy. The proxy acts as a
switch. In network service, the device supports IPv4 server addresses or domains.
Click Auto Register in the Network configuration interface to open the Auto Register
configuration interface.
Configuring Events
Click the Event arrow to expand the Event selection tree.
Figure 5-38
Multicast Configuration Interface
Figure 5-39
Auto Register Configuration Interface
Web Operation | 173
800-18160 - B - 07/2014