Section 2: Monitor Channels; Section 3: Open All Button; Section 4: Start Talk Button - Honeywell HEN04101(X) User Manual

144 | Performance Series Network Video Recorder User Guide
There are six function tabs:
•
•
•
•
•
•

Section 2: Monitor Channels

The Monitor Channels section displays monitor channels that are successfully connected to the
NVR. Left-click to select a channel for viewing.

Section 3: Open All Button

The Open All button enables/disables all channels in the real-time monitor. You can also select
the Main Stream or Extra Stream.

Section 4: Start Talk Button

Click to enable communication. Click
bi-directional communication mode. There are four options for the communication mode:
DEFAULT, G711a, G711u, and PCM.
www.honeywell.com/security
Preview: You are currently in the Preview mode, where you can see all these tabs.
Playback: See Playing Back Recorded Video on page 148
Alarm: See Enabling and Disabling Alarms on page 152
Set: See Configuring Settings on page 154
Information: See Configuring System Information on page 202
Logout: See Logging Out on page 204
Figure 5-6 Monitor Channels Section
Figure 5-7 Open All Button
Figure 5-8 Start Talk Button

in the control panel on the right to select the