Honeywell HEN04101(X) User Manual page 29

Table 1-2NVR Front Panel Components
Component Name
Enter
USB 2.0 Port
HDD Abnormal
Indication Light
Network Abnormal
Indication Light
Note
Figure 1-2
Table 1-3NVR Back Panel Components
Icon/Marker Port/Component
Name
USB 2.0 Port
Network Port
RS232 (RS-422) 232 Debug COM
HDMI High Definition
Media Interface
VGA VGA Video Output
Port
Icon
ENTER
HDD
Net
The 4-channel NVR is shown in this User Guide.
NVR Back Panel
Connection Function
VGA
Function
• Confirm the current operation.
• Go to the Default button.
• Go to the Menu.
Connect to a USB 2.0 storage device, USB 2.0
mouse or CD/DVD burner.
Lights RED to indicate an HDD error or when the
HDD capacity is below the specified threshold.
Lights RED to indicate that a network error has
occurred or that there is no network connection.
Connect a USB 2.0 mouse.
10 M / 100 M / 1000 Mbps self-adaptive Ethernet
port. Connect to a network cable.
For general COM debugging, to configure the IP
address or to transfer transparent COM data.
High definition audio and video signal output port.
It transmits uncompressed high-definition video
and multiple-channel data to the display device's
HDMI port.
VGA video output port. Outputs the analog video
signal. It can connect to the monitor for viewing
analog video.
Introduction | 29
800-18160 - B - 07/2014