Configuring Storage; Configuring Schedules For Storage - Honeywell HEN04101(X) User Manual

Configuring Storage

Click the Storage arrow to expand the Storage selection tree.

Configuring Schedules for Storage

You can add or remove schedules for recording.
There are four recording modes: General (auto), Motion Detect, Alarm, and MD&Alarm.
1.
Table 5-20 Configuring for Abnormalities
Configuration
Show Message
Alarm Upload
Send Email
Buzzer
Click Schedule in the Storage selection tree to open the Schedule configuration
interface.
Description
Click to enable a pop-up message on your local host PC
screen to let you know an alarm has occurred.
The system can upload the alarm signal to the center
(including the alarm center).
The system can send an email when an alarm is detected.
When you have enabled the Snapshot function, the system
can also send an image attached to the email. Go to Main
 
Menu Setting Network
settings. See Configuring Email Settings on page
Click to enable the Buzzer function. When an alarm occurs,
the buzzer beeps.
Web Operation | 185

Email to configure the email
168.
800-18160 - B - 07/2014